SPALECK Oberflächentechnik GmbH & Co. KG
     
  • Home
  • Examples of Applications
  • Products
  •  
  • Drum Barrel Finishing
  • Vibratory Finishing
  • Throughfeed Finishing
  • Centrifugal Force Finishing
  • Drying
  • Process Water Technology
  • Inspection
  • Process Media
  • Membrane cleaning agents
  • Industrial cleaner
  •  
  • Special Solutions for
  • Service
  • Partner
  • Contact
  • Downloads

          
DIN EN ISO 9001
Innovativ durch Forschung

After many years of partnership and a number of successful common projects, InduVis GmbH has transferred its business to Spaleck Oberflächentechnik GmbH & Co. KG with effect from 01.12.2021.

Inspection

Due to high quality requirements, a large number of components are inspected optically today. Often, the visual inspection is still done manually, as it can be organised very individually in this way. However, this form of work is very tiring, and mistakes are unavoidable in the long run, but they must be avoided.

Automated inspection eliminates the human factor as a potential source of error and therefore significantly increases the quality of the inspection. The inspection is based on a previously defined quality standard whose deviations are identified 100 percent. In addition to 3D surface inspection and precise dimensional control, our inspection systems also offer you the option of defect classification and precise counting.

Do you have further questions on the subject of surface inspection or do you already have a project that you would like to start together with us? Please do not hesitate to contact us.

Ingo Löken

Ingo Löken
Sales Engineer
Specialized in Mint Applications
and Inspection Technology
Telephone: +49 2871 9500 16
E-Mail: I.Loeken(at)spaleck.biz


 

Spaleck InspectionTechnology

SIT 200 R

Fully automatic inspection system including measuring and evaluation unit as well as individual infeed and outfeed - for the inspection of structured surfaces, such as coins or medals

Technical data:

  • Single- or double-sided 3D and 2D camera inspection
  • Inspection speed approx. 2000 pcs./min. for parts with a diameter of 20 mm
  • Height resolution down to 1 μm and defect detection down to 5 μm depending on the surface Speed
  • Color check
  • Upgradable with different measuring sensors, e.g. EMS-check
  • Individual adaption of the inspection process to the customer's requirements

SIT 100 R

Semi-automatic inspection system including measuring and evaluation unit as well as individual infeed and outfeed - for the inspection of structured surfaces, such as coins or medals

Technical data:

  • Single-sided 3D and 2D camera inspection
  • Inspection speed approx. 1000 pcs./min. for parts with a diameter of 20 mm

 

 

SIT 300 P

Fully automatic inspection system including measuring and evaluation unit as well as individual infeed and outfeed - for the inspection of smooth surfaces, such as coin blanks.

Technical data:

  • Single- or double-sided 3D and 2D camera inspection
  • Inspection speed approx. 3000 pcs./min. for parts with a diameter of 20 mm
  • Height resolution down to 50 μm depending on the surface Speed
  • Color check
  • Upgradable with different measuring sensors, e.g. EMS-check
  • Individual adaption of the inspection process to the customer's requirements

SIT 150 P

Semi-automatic inspection system including measuring and evaluation unit as well as individual infeed and outfeed - for the inspection of structured surfaces, such as coin blanks.

Technical data:

  • Single-sided 3D camera inspection
  • Inspection speed approx. 1500 pcs./min. for parts with a diameter of 20 mm
  • Height resolution down to 3 μm depending on the surface speed
  • Usable as infeed control system

SIT pure

You would like to integrate an inspection unit into your existing process?

Please contact us - we will provide you the suitable inspection technology. If desired, we can also integrate it into your process.